The use conditions of mining dump truck tires are complex. HUBEI AULICE TYRE CO., Ltd reminds us to carry out daily inspection of tires and find hard objects on tread and pattern in time.
The pressure and wear degree of truck tires shall be carefully checked through daily maintenance and equipment refueling, and detailed records shall be made and fed back to the workshop. Through the inspection, there are no scars and wounds on all parts of the carcass, so as to ensure the safety and quality of the carcass. If relevant problems are found, replace them in time.
Whether the mining dump truck tire needs to be replaced can be judged according to the following points:
1. If the tire is aging (for example, there are countless small cracks at the tread groove bottom or tire edge that are about to damage the carcass), it is necessary to replace the tire in time, no matter how long the tire has been used and how much it has been worn.
2. If the remaining groove depth of the tire pattern reaches or is lower than 1.6mm (there is an indication mark indicating the depth in the longitudinal straight groove of the tire tread), the tire must be replaced because the drainage capacity of the tire has been greatly reduced, and it will be more dangerous for the vehicle to drive in the wetland.
In addition, it is particularly important to remind that bulging tires shall not be used anymore.
It is recommended to refer to the above contents for whether the tire needs to be replaced. The general tire is used for about 40000-60000 km for 3-5 years. Because the use of tires is affected by driving habits and road conditions, it may also be different from mileage or time. It is not recommended to judge simply from mileage or time.
Generally, the front wheel of a mining dump truck is the steering wheel and the rear wheel is the driving wheel. The front-wheel should be installed with new tires with good performance as far as possible because once the front wheel is exploded, the car will be damaged to the operation site and inconvenient for disassembly and assembly. There are four tires on the rear wheel. Even if one tire is exploded, the car can be driven to the workshop for disassembly and assembly.
If you want to choose the best mining truck tires, you need to analyze and select the most appropriate tire according to different situations.
HUBEI AULICE TYRE CO., LTD..
TBR & OTR & BIAS & AGRI & FORKLIFT TYRE
Whatsapp & Viber & Skype & WeChat: +86 137 8253 1925
Whatsapp Directly: https://lnkd.in/gMkvM7NY
Contact Person: Mr. Johnny Wu
13.00R22.5 Tubeless Truck Tires / AR869 TBR Commercial Vehicle Tyres
Outstanding Ground Grip 8.25R16 Mining Truck Tire Radial Truck Tyre Light Truck Tires NOM 16949 certificate AR111
Aulice Steel wire TBR Dump Truck Tyre 295/80R22.5 Tire pattern design AW002
Inner Tube 7.5 X 16 Tires / All Weather Light Truck Tires For 6.00G Rim
6.50R16 7.00R16 7.50 R16 Light Truck Highway Tires AR1121 1500kg Load
CCC SGS Approval 7.00R16 Light Duty Truck Tires With Long Mileage
22mm Tread 11r20 Big Truck Tires Heavy Load Tires Excellent Heat Disspation
High Performance Thailand Rubber 18 Ply Truck Tires AR898 4x4 Truck Tires Good Wear Resistance Tyres